Easy DIY Coffee Mug Bird Feeder — Upcycle a Mug into a Charming Hanging Feeder
Turn an old coffee mug and a plate into a whimsical hanging bird feeder. This simple upcycle project uses basic supplies and a strong craft adhesive to create a cozy feeding spot for backyard birds. It's quick to assemble, makes a great gift, and brings cheerful wildlife right to your window.
Materials:
Coffee mug
Plate (the plate used here is 8" in diameter)
2 table knives
E6000ยฎ Craft Adhesive
Twine
Birdseed

Mug and plate positioned with two table knives supporting the handle while you prepare to glue.
Directions:
- Wash and thoroughly dry the mug and plate to remove any dust, grease, or debris. Proper adhesion requires dry, clean surfaces.
- On a flat surface, place the plate and set the mug on top as you plan to attach it. Slide two table knives under the mug so they prop up the mug and keep the handle centered and upright — this helps keep the handle straight while the glue sets.
- Add a line of E6000 craft adhesive down the spine of the mug opposite the handle, then press the mug firmly onto the plate. Double-check that the handle is centered using the knives. Follow the adhesive manufacturer's directions for handling and ventilation.
- Let the glued assembly sit undisturbed to cure. In this tutorial the project was left on a table for one to two days; always follow the glue's recommended drying and curing times before hanging the feeder.
- When the adhesive is fully set, tie a length of sturdy twine or string around the mug handle and knot securely. Hang the feeder from a tree branch, shepherd's hook, plant hook, or any suitable spot outdoors.
- Fill the plate area with birdseed. Place the feeder where you can enjoy watching the birds but away from high-traffic areas where seed or droppings could be a nuisance.

Apply adhesive to the mug base opposite the handle, then press onto the plate and allow to cure undisturbed.

Finished hanging coffee mug bird feeder — ready to fill with seed and welcome backyard birds.
Notes & tips:
- Try a few mug-and-plate combinations before gluing to find a pair that sits well together — a flatter mug base and a suitably sized plate (the example uses an 8" plate) work best.
- Use outdoor-safe adhesive and follow safety and curing instructions. Keep children and pets away while the glue sets.
- Check the feeder regularly for wear, loose glue, or water pooling after rain; replace or re-secure as needed.
No comments
Write a comment