Tire Swing for Kids
The tire swing is a classic childhood joy that brings endless fun and laughter. Swinging back and forth on a sunny day, the wind in your hair, can make anyone feel like a carefree kid again. It's a simple pleasure that never fails to bring a smile to faces of all ages. Gathering around a tire swing with friends or family creates memories that last a lifetime, filled with giggles and pure happiness. So, take a moment to embrace the childlike joy of a tire swing and let it whisk you away to a simpler, happier place.
The main supplies necessary for a good tire swing are
For measuring purposes, figure out the length you would need to attach the tire to a tree then multiply by three.
Put a U-bolt through the end of one section of chain then insert the U-bolt through one of the sets of holes you drilled into the tire.
On the inside of the tire, place the plate that came with the U-bolt on the U-bolt ends sticking through the tire.
Screw on the hex nuts.
Repeat this process with the other 2 sets of holes in the tire and the rest of the chain and the other two U-bolts.
Now we are ready to hang the tire from a tree!
Find a nice thick branch that will hold approximately 150 pounds.
Its also nice if you can at least reach the branch with a regular ladder.
Gather the 3 lengths of chain from the tire and hook them to a chain S-hook so that the tire sits level.
Hook the other end of the S-hook to a carabiner.
We are going to use nylon cord to attach the entire unit to the tree. Why?
The nylon cord will not eat into the tree the way chain would.
Knot one end of the nylon cord to the carabiner and the other end to the tree.
Test out the tire swing out before letting your little ones on it!
Now you are ready for some fun.