Looking to add a touch of fun to your keys? Why not try making your own DIY Tumbling Tower Blocks Keychain! This adorable and unique keychain is not only a practical accessory but also a conversation starter. Gather some mini wooden blocks, colorful paint, and a keychain ring, and you're all set for a crafting adventure. Customize each block with your favorite colors, patterns, or even tiny motivational quotes. Once assembled, this personalized keychain will surely bring a smile to your face every time you reach for your keys. Let your creativity shine and enjoy adding a little DIY flair to your everyday essentials!
Supplies
(2) Tumbling Towers Game wooden pieces
Wood Burning Tool
Wood Burning Hot Stamps – letters ‘X’ and ‘O’ (I used this Hot Stamps pack)
Wood Burning Hot Stamps – heart symbol from this Hot Stamps pack
Wood Glue (While optional, it’s super inexpensive and adds a layer of strength)
2 Key Rings
Metal Craft Pliers
Instructions
Step 1
While unplugged, screw the letter “x” onto your wood burning tool.
Step 2
Plug in the wood burning tool. Allow it to heat up according to the directions (probably about 5 minutes, but your system might be different.
Step 3
Place two wooden game pieces side by side. Press the “x” into the top of the left game piece, then repeat on the bottom of the right game piece.
Step 4
Unplug the tool and allow it to cool completely.
Step 5
Remove the “x” stamp with the pliers. Then screw in the “o” stamp. Plug in the tool and let it heat up again.
Step 6
Press the “o” into the bottom of the left game piece, then repeat on the top of the right game piece.
Step 7
Unplug the tool and allow it to cool completely.
Step 8
Remove the “o” using pliers, and then screw in a heart symbol. Plug in again and allow it to heat up.
Step 9
With the pieces evenly lined up next to each other, press the heart symbol onto the middle of both pieces as evenly as you can. You want one half of the heart on one block, and the other half of the heart on the other. Unplug the tool and let it cool completely.
Step 10
Pour a little bit of glue onto a scrap of paper or wood. Dab the keychain screw end into the glue.
Press the keychain screw end firmly into the top center of the keychain, turning clockwise until the entire screw is in the wood block.
