DIY Pom-Pom Mouse Pad: Easy, Charming Desk Upgrade
Looking to add a touch of charm to your workspace? Try this simple DIY Pom-Pom Mouse Pad. It’s an easy, inexpensive craft that turns a plain cork trivet into a playful, personalized desk accessory. Below are the supplies you’ll need and step-by-step instructions to paint, monogram, and trim your mouse pad with pom-poms.

Finished pom-pom mouse pad with painted monogram and pom-pom trim.
Supplies for Pom-Pom Mouse Pad
- Cork trivet (mine was 7″ square and 1/2″ thick)
- Acrylic craft paint
- Letter stencil
- Pom poms (3/8″ – 1/2″ size)
- Foam brush
- Hot glue gun

Gather your supplies: cork trivet, paint, pom-poms, foam brush and glue gun.
How to Make Pom-Pom Mouse Pad
Step 1: Paint Base Coat
Cover the top and sides of your trivet with 2–3 coats of paint, letting it dry between coats. Use even strokes or a foam brush for a smooth finish.

Apply 2–3 coats of acrylic paint to the cork base and allow to dry between coats.
Step 2: Add Monogram
Use a second color of paint and a letter stencil to add your initial or monogram. Position the stencil where you want the letter (the example shows it in the bottom corner), tape it down with masking tape, and use a small amount of paint on your foam brush with an up-and-down blotting motion to avoid bleeding.
Step 3: Glue Pom-Poms to Edge
Warm up your glue gun and run a bead of glue along the side of your mouse pad, working about an inch or so at a time. Press each pom-pom into the glue while it’s still hot, using just enough glue so it doesn’t ooze out. Continue all the way around the pad until the edge is trimmed with pom-poms.

Glue pom-poms around the edge to complete the mouse pad.
Tips: Work in small sections so the glue stays tacky while you place pom-poms. Trim any excess glue strings once cooled and test the pad under your mouse to ensure it sits flat.