DIY Watering Can Planter
Creating a DIY Watering Can Planter is a fun and creative project that will brighten up your garden or living space! Not only will you add a personalized touch to your outdoor décor, but you'll also enjoy the satisfaction of bringing new life to something old. So grab your tools, get crafty, and let your green thumb shine with this delightful project!

Watering Can Planter Supplies:
● 1 Watering Can
● Drill
● Rocks, Broken Pottery, etc (for drainage)
● Potting Soil
● Gardening Hand Trowel
● Small Plants
● Tray (to catch water from watering if this is not set in your garden)
Watering Can Planter Directions:
Make sure your watering can is free of debris and wash it with soap. If you are reusing an old watering can and had used it to mix with something besides water, this will remove any old residue that may harm your new plants.

Make a drainage hole in the bottom of your watering can using an electric drill (as always, read the manufacturer safety recommendations before using any power tool). This will help you not overwater your plants.
Place a few rocks, stone, broken pieces of pottery in the bottom of your watering can (without blocking your drainage hole(s). This will also help promote drainage.
Fill the watering can mostly full of soil.

Use the trowel to dig a hole in the center of the can for your plants. The flowers seen in this tutorial were broken into smaller sections and planted around the inside of the watering can (remember, a small can was used in this tutorial).

Place a tray underneath your watering can to catch excess moisture from watering if you plan on placing your can anywhere other than in your garden.

Water your soil with another watering can. Do not over-water even if you have a drainage hole in the bottom of your watering can.

That is it! Place your watering can planter in a sunny spot or in the shade depending on what type of plants(s) you chose to grow. Make sure to check your can every day or two to see if it needs water as shallow containers dry out quickly.
If you keep your watering can planter outside, when frost threatens, just take the watering can planter inside!
This is truly a simple and easy way to reuse old watering cans while adding a touch of garden art to your outdoor (or indoor!) garden.
No comments
Write a comment