DIY Essential Oil Diffuser Bracelets: Easy, Stylish Aromatherapy Tutorial
DIY Essential Oil Diffuser Bracelets are a fun, stylish way to carry the benefits of aromatherapy with you. With a few basic supplies—porous lava stone beads, stretch cord and decorative craft beads—you can make personalized bracelets that release scent throughout the day. These bracelets are simple to make, customizable as gifts, and a great introduction to wearable aromatherapy.

Materials
- 1 mm Stretch Magic Cord
- Lava Stone Diffuser Beads (porous, not polished)
- Craft beads for jewelry (your choice of colors and finishes)
- Scissors
- Essential oil(s) of your choice
Step-by-step Directions
Follow these steps to build a simple, symmetrical diffuser bracelet with the lava stone bead positioned on the bottom of your wrist:
- Select the beads you want to use and decide where the lava stone(s) will sit. This tutorial places a lava stone at the center bottom of the wrist.
- Measure and cut about 10"–12" of Stretch Magic Cord to allow room for beading and tying the knot. Note: elastic cord stretches over time, so avoid making the bracelet too loose.
- Choose porous lava stone beads (do not use polished lava stone—polished surfaces do not absorb oils well). Lava beads are available in various sizes, shapes and natural colors.

Now it is time to string the beads:
- For this style, thread the lava stone bead onto the cord first (this will end up on the underside of your wrist).
- Add the craft beads on either side of the lava stone, sliding them along the cord. This tutorial uses a symmetrical layout: the lava stone is centered and matching craft beads mirror each other on both sides.

Finish the strand:
- Add a final lava stone bead to each end of the cord if your design calls for it, or continue with your chosen bead pattern until the bracelet fits comfortably around your wrist.
Tying the Bracelet
Once all beads are on the cord, tie a secure knot. A simple, tight surgeon's knot or square knot made with the two cord ends works well. Wrap the strands, pass them through the loop, and pull firmly so the beads sit snugly together. Make sure the knot is tight—this is essential for durability.

Trim the excess cord to about 1/4" once the knot is secure. If desired, you can add a dab of clear jewelry glue to the knot for extra security (optional).
Using and Caring for Your Diffuser Bracelet
To diffuse oils, place a drop or two of your favorite essential oil onto a lava stone bead and allow it to absorb. The scent should last through the day; you can switch oils as often as daily if you like. When switching oils, the previous scent will not typically mix with the next after the bead has dried. Be aware that light-colored lava stones (for example, white) may show slight discoloration from oil.
Tips & Safety
- Avoid applying undiluted essential oil directly to skin—apply oil to the lava bead only.
- Test a drop of oil on one bead first to check for staining if concerned about color change.
- Keep bracelets away from heat sources or rough surfaces that could damage the beads or weaken the elastic.
- To refresh the bead between scents, dab with a small amount of rubbing alcohol on a cotton swab and let dry before adding a new oil.
These bracelets make lovely, personalized gifts and are an easy, creative way to enjoy aromatherapy all day long.