Build Stylish DIY Paver Planters for Your Patio — Easy Step-by-Step Guide

Give your patio an instant style boost with simple, sturdy paver planters you can build in an afternoon. These planters pair concrete pavers with a basic wooden frame to create attractive, weather-ready containers that suit many plant styles. Below is a clear materials list and step-by-step instructions with photos to guide you through the project.

When it comes to sprucing up your patio, DIY paver planters are a fantastic way to add both charm and functionality to your outdoor space. These planters not only bring a touch of natural beauty but also provide a stylish touch that elevates your patio's aesthetic. With just a few simple materials and a bit of creativity, you can create custom paver planters that perfectly complement your patio decor. Whether you're a seasoned DIY enthusiast or just starting out, this project is a fun and rewarding way to add a personal touch to your outdoor oasis. Get ready to roll up your sleeves and watch your patio come to life with these delightful paver planters!

Equipment

Circular saw

Drill with drill bits

Tape measure

Utility knife

Paintbrush(es)

2 Bungee cords

Safety goggles

Gloves

Materials

4 12 x 12 pavers

2 8-foot 2 x 2s

Caulking gun and construction adhesive

Sanding block

Stain

Pencil

3" exterior deck screws

1 roll landscaping fabric small

Instructions

Cut your 2 x 2s into four pieces of 16" and eight pieces of 12" using the circular saw.

Sand all the wood and remove any dust with a tack cloth.

Stain your wood – brush on the liquid stain and wipe the excess off with a cloth. Let dry.

Pre-drill and countersink the 2 x 2 pieces together, with the 16˝ pieces forming the legs, and the 12˝ pieces forming the support between the legs. Set aside.

Place a paver down on the ground. Place two of the 16" pieces on each side, and one 12" piece at the bottom. Place a thick bead of adhesive along the inside edges of the wood frame, glue to the paver, and then screw the wood pieces together.

Repeat step 5 three more times to make four sides.

Set the four paver sides in a square with the bottoms up, and place beads of adhesive along the bottom of the concrete pavers.

Place the base into the adhesive and set the remaining screws. Place a bungee cord around the planter and let dry overnight.

To finish, line the planters with landscaping fabric and add the plants of your choice. You can also drop pots directly into your planters.