Sign in Create account

Make DIY Golf Bookends from Old Clubs — Step-by-Step Guide

Turn old golf clubs into a charming, personalized set of bookends with a few basic tools and supplies. This easy weekend project combines simple woodworking, paint, and a bit of crafting to produce sturdy, decorative bookends perfect for a golfer's home or as a thoughtful handmade gift.

If you're looking to add a touch of charm to your bookshelf while showcasing your love for golf, DIY golf bookends are a fantastic project to try out! By repurposing old golf clubs or crafting new ones from scratch, you can create unique and personalized bookends that will bring a smile to any golfer's face. Get creative with paint or decorative elements to make them pop and reflect your style. This fun and easy DIY project not only adds a fun and practical element to your home decor but also makes for a thoughtful and personalized gift for the golf enthusiasts in your life. So, grab your tools and let your creativity tee off for some swingin' bookends that are sure to make a hole-in-one on your bookshelf!

Make DIY Golf Bookends from Old Clubs — Step-by-Step Guide

Materials

  • Sander with 220 grit paper (or just 220 grit paper to sand by hand)
  • Wood – measured 3.25" x 7" x 5/8" (used four pieces of board 7" long; reclaimed wood like fence posts, pallets or leftover project wood work well)
  • E6000® Craft Adhesive
  • 4 wood screws, about 1.5"
  • 2 pieces 12×12 scrapbook paper – grass pattern
  • Christmas green paint
  • Thicket paint color
  • Mod Podge
  • 2 golf balls
  • 2 golf clubs
  • Green felt (for bottom protection)

Tools

  • Hacksaw
  • Metal file
  • Cordless drill
  • Sander with 220 grit paper (or sand by hand)
  • Scissors
  • Ruler
  • Foam paintbrush
  • Small paintbrush

Instructions

Prepare the clubs:

Make DIY Golf Bookends from Old Clubs — Step-by-Step Guide

Use a hacksaw to trim your golf clubs. The clubs used in this project were trimmed to about 2" from the end. After cutting, use a metal file to smooth any rough metal edges. Set the club heads aside once they're filed.

Prepare the wood bases:

Make DIY Golf Bookends from Old Clubs — Step-by-Step Guide

Trim your boards to the desired length for your bookends. The example pieces are 7" long, 3.25" wide and 5/8" thick (matched to the cut club length). Sand the wood with 220 grit where necessary so the surfaces and edges are smooth. Wipe away all dust before assembling.

Drill pilot holes into the corner of the bottom piece of wood and align the pieces before fastening. Apply a thin line of glue (Elmer’s or E6000) if you want extra strength, then screw in the wood screws to assemble each bookend.

Paint and cover:

Paint the assembled bookends with green acrylic paint using a small brush. The example color was achieved by mixing Christmas Green and Thicket paint. Pay attention to the exposed sides that will remain visible after covering with scrapbook paper or felt.

Trim your grass-pattern scrapbook paper slightly smaller than the wood surface. Apply a thin coat of Mod Podge to the wood and to the back of the paper with a foam brush, then place the paper on the wood. Smooth out air bubbles and excess Mod Podge with your hand. Repeat for all flat surfaces and let dry about two hours. Cover the paper with another thin coat of Mod Podge and let dry about one hour.

Make DIY Golf Bookends from Old Clubs — Step-by-Step Guide

Attach clubs and balls:

Experiment with placement of the trimmed club heads and golf balls before gluing. When you’re happy with the layout, use E6000® Craft Adhesive to affix the clubs and balls to the bookends. Place the finished bookends in an undisturbed spot to cure; the example set was left untouched for two days before being used to hold books.

Optional finishing touch: Attach green felt to the bottom of each bookend to protect furniture and shelving from scratches. This also covers the screw heads on the underside.

Display: Position your finished golf bookends on a shelf or desk to hold books in place.

Notes

If you can find club heads that face opposite directions, the overall look will flow better. Drivers, wedges, and woods add more visual impact than a putter.

Make DIY Golf Bookends from Old Clubs — Step-by-Step Guide

Make DIY Golf Bookends from Old Clubs — Step-by-Step Guide

Like!
☆ Add To Favorites
55
No comments