Make Modern Faux Concrete Bookends from Foam — Easy Step-by-Step DIY
Give your shelves an industrial-chic update with these easy DIY faux concrete bookends. Using a foam base and a few specialty finishes, you can create realistic-looking concrete pieces in any shape, then add color or letters for a personalized touch. This tutorial walks through the materials and simple steps to build, finish, and style your own bookends.

Finished faux concrete bookends styled on a shelf.
Materials:
- FloraCraft Styrofoam cubes (or foam shapes of your choice)
- FloraCraft Smooth Finish (to fill and smooth foam)
- FolkArt Light Concrete Painted Finish (for the concrete texture)
- Spatula or putty knife
- Hot glue gun
- Cardboard letters or other embellishments
- Craft paint and brushes for a pop of color
- Optional: cork or non-skid pads for the base
Step 1 — Coat the foam with Smooth Finish
Start with your foam cube or chosen foam shape as the base. Apply FloraCraft Smooth Finish with a spatula or putty knife to fill any foam seams and create a smooth surface that will accept the concrete finish.

Applying the Smooth Finish to a foam cube with a putty knife.

Close-up of the Smooth Finish being spread over the foam.
Let the Smooth Finish dry and set completely before moving on to the next step.
Step 2 — Apply the Concrete Finish
Once the Smooth Finish is fully dry, apply the concrete finish. Dab or spread the FolkArt Light Concrete Painted Finish over the foam — its gritty texture mimics real cement and hides small imperfections.

Dabbing the concrete finish onto the prepared foam surface for a textured look.

Texture of the concrete finish visible after application.
Apply the same concrete finish to any cardboard letters or embellishments you plan to attach, so all pieces share the same surface texture.

Applying concrete finish to a cardboard letter to match the bookend surface.
Again, allow all pieces to dry completely.
Step 3 — Glue letter to the cube
Attach your letter or decorative element to the concrete-coated cube with hot glue. Press firmly and hold until secure.

Hot-gluing a cardboard letter to the concrete-coated foam cube.
Step 4 — Touch up with concrete finish
To make the letter appear as part of a single concrete piece, fill seams and edges with a bit more concrete finish. Blend so the join is subtle and cohesive.

Using concrete finish to blend seams between the letter and cube for a unified look.
Step 5 — Tape off and paint the base (optional)
Add a pop of color to the bottom edge by taping off the area, painting, and letting it dry. This decorative detail gives a modern contrast to the concrete look.

Taping and painting the base edge to add a colorful accent.
Tip: If you need non-skid protection, hot-glue a small piece of cork or adhesive pads to the bottom of the bookend.

Optional cork pad glued to the bottom for grip and surface protection.
Final look — admire the texture
The concrete finish creates authentic-looking cement texture — roughness and small irregularities make the faux finish convincing and stylish.

Close-up showing the gritty, realistic concrete texture from the finish.
Enjoy your new handmade bookends — they make great gifts and add a contemporary touch to any room.